5 real jobs in Utah County
Our work: recent jobs in Utah County
5 jobs written up with the model number, what the technician found and the parts fitted. No customer names and no house numbers.
What will you find on these pages?
5 real jobs from Orem, Provo, Spanish Fork, Springville and Vineyard are written up here, with the model number and any part fitted. They include a Sub-Zero 550 water inlet valve, a Samsung WA45T3200AW lid lock switch, two Samsung front-loaders and a Frigidaire stacked washer-dryer. Repairs cost $150 to $1,000, depending on the fault, the part and the model.
-
Frigidaire Stacked Washer-Dryer Service Call in Provo
A service call on a compact stacked washer-dryer in a laundry area. Stacked units use the same washer and dryer parts as standalone machines, but the cabinet comes apart differently and there's less room to work.
-
Samsung Front-Load Washer Diagnosis in Orem
The top panel came off for an internal check of the control board, wiring harness, water inlet valves and drum.
-
Samsung Top-Load Washer Lid Lock Replacement in Spanish Fork
The lid lock switch assembly was replaced. The old part showed signs of burning or electrical failure. A top-loader won't spin until the lid lock reports the lid is shut, so a failed switch stops the cycle with wet clothes in the tub.
-
Sub-Zero Water Inlet Valve Replacement in Springville
The water inlet valve was replaced with OEM Sub-Zero part #4201440. Heavy dust was noted on the condenser grille.
-
Samsung Front-Load Washer Leak Diagnosis in Vineyard
Water pooling at the base. The diagnosis narrowed it to a possible door boot seal or drum issue.
If you own one of these models, the write-up shows you what failed on one like yours, what the technician checked, and what the fix was. If you don't, it shows you how we work: diagnose first, name the fault, and let you decide.
How we write up a job
These five are the start. Call (385) 238-1594 and have the model number ready.
- From the job record. Every job on this page happened. The date, the city, the model number and the part all come from the job record, and each job has its own photo. We leave out the customer's name, the street and the house number, every time.
- Why the model number. Because a model number tells you more than a slogan. If you own a Samsung WA45T3200AW top-load washer, the Spanish Fork page shows the lid lock switch assembly that failed on one, what the old part looked like and that it was replaced. If you own a Sub-Zero 550, the Springville page names the OEM water inlet valve, part 4201440, that went in.
- Not every visit ends in a part. Two of the five are diagnoses: a Samsung WF328AAW front-loader in Orem opened up for an internal check of the control board, wiring harness, water inlet valves and drum, and a Samsung VRT front-loader in Vineyard with water pooling at the base, narrowed to a possible door boot seal or drum issue. One more is a service call on a Frigidaire stacked washer-dryer in Provo. We write those up the same way, and where the record leaves a cause open, the page leaves it open too.
- The first visit is a diagnosis. Christian or Tim opens the machine, names the fault, and you decide. The diagnostic visit is $99 to $159 and is credited toward the repair if you go ahead. Repairs cost $150 to $1,000, depending on the fault, the part and the model, and the parts we install and our labor carry a 90-day guarantee.
What these jobs have in common
- Washers lead the list. Four of the five jobs are washers, top-load, front-load and stacked. Door and lid locks, boot seals and leaks are some of the most common faults we see.
- The technician checks before replacing. On the Orem front-loader, the control board, harness, inlet valves and drum were all checked before anything was named.
- OEM parts where they matter. The Sub-Zero got an OEM Sub-Zero valve, not a generic one.
- The extra detail gets noted. On the Sub-Zero, the dusty condenser grille was recorded, because a dusty condenser makes the compressor work harder.
How we write up a job
These five are the start. Call (385) 238-1594 and have the model number ready.
Book a RepairFrom the job record
Every job on this page happened. The date, the city, the model number and the part all come from the job record, and each job has its own photo. We leave out the customer's name, the street and the house number, every time.
Why the model number
Because a model number tells you more than a slogan. If you own a Samsung WA45T3200AW top-load washer, the Spanish Fork page shows the lid lock switch assembly that failed on one, what the old part looked like and that it was replaced. If you own a Sub-Zero 550, the Springville page names the OEM water inlet valve, part 4201440, that went in.
Not every visit ends in a part
Two of the five are diagnoses: a Samsung WF328AAW front-loader in Orem opened up for an internal check of the control board, wiring harness, water inlet valves and drum, and a Samsung VRT front-loader in Vineyard with water pooling at the base, narrowed to a possible door boot seal or drum issue. One more is a service call on a Frigidaire stacked washer-dryer in Provo. We write those up the same way, and where the record leaves a cause open, the page leaves it open too.
The first visit is a diagnosis
Christian or Tim opens the machine, names the fault, and you decide. The diagnostic visit is $99 to $159 and is credited toward the repair if you go ahead. Repairs cost $150 to $1,000, depending on the fault, the part and the model, and the parts we install and our labor carry a 90-day guarantee.
Common questions
Got a machine like one of these?
Call and tell us the model number. Samuel takes the office calls Monday to Friday, 8am to 5pm.
(385) 238-1594Are these real jobs?
Yes. Each one comes from a job record with a date, a city, a model number and, where a part was fitted, the part. Each job has its own photo.
Why are there no customer names or house numbers?
Because a repair page shouldn't point at someone's home. We name the city, never the street, the house number or the customer.
Will my repair look like one of these?
If you own the same model, the fault may be similar, but every machine is diagnosed on its own. The technician names the fault, and you decide.
What does a repair like these cost?
Repairs cost $150 to $1,000, depending on the fault, the part and the model. The diagnostic visit is $99 to $159, and it's credited toward the repair if you go ahead.
What do the parts and labor come with?
A 90-day guarantee on the parts we install and on our labor. The business is insured.
Can I see the jobs done in my city?
Yes. Each area page lists the jobs done there, and each service page lists the jobs for that appliance. Vineyard jobs sit with Orem.
Tell us what is going on. We'll get back to you.
Every repair carries a 90-day guarantee on the parts we install and on our labor.
- Rated 4.8 on Google from 290 reviews
- Monday to Friday, 8am to 5pm
- Diagnosed first by technicians with more than 10 years each
Book a Repair
Request received.
We've got your details and we'll get back to you. Need us sooner? Call (385) 238-1594.
That did not send.
Something went wrong on our side. Please call so we do not miss you.
Call (385) 238-1594Your submission was flagged as spam.
We did not receive it. If this is a mistake, please call us so we do not miss you.
Call (385) 238-1594Rather talk now? (385) 238-1594




