What does stove and cooktop repair involve?
Stove and cooktop repairs run $150 to $1,000, depending on the fault, the part and the model. The diagnostic visit is $99 to $159, and it's credited toward the repair if you go ahead. Christian or Tim diagnoses first, then you decide. Every repair carries a 90-day guarantee on parts and labor.
On a coil or glass (radiant) top, power comes in through the terminal block, runs to an infinite switch behind each knob, and reaches the element. The infinite switch cycles the element on and off to set the heat level. Induction tops work differently: a control board drives a copper coil under the glass, which heats a magnetic pan directly, and a cooling fan keeps the electronics from overheating. So when a burner fails, we follow the power from the supply to the element and find where it stops.
Last updated
Don't cook on a cracked top. Spills can reach the elements and wiring below, which creates a shock and fire risk.
Oven side not working? See Oven Repair.
Common stove and cooktop problems
- One burner won't heat
- The element, its receptacle (on coil tops), or the infinite switch behind the knob.
- Stuck on high, or only works on high
- A failed infinite switch.
- All burners dead, clock still on
- A tripped leg of the 240V breaker, a burned terminal block, or the control board.
- Cracked glass top
- A full glass panel replacement. Ceramic glass can't be patched.
- Induction won't detect the pan
- The pan isn't magnetic, or there's a fault in the board or coil.
- Induction error or shutdown
- The board, a coil or the cooling fan. Induction electronics shut down to protect themselves if the fan stops.



How it works
Call or book online
Give us the brand, the model number (inside the oven door frame or under the cooktop lip), which burner, and whether the clock still works.
Quick checks
Check the double breaker. On coil tops, swap the dead element with a working one. If the problem moves with the element, the element is bad. On induction, try a pan that a magnet sticks to.
Diagnosis
We test the elements, receptacles, switches, limiters, terminal block and board, or the boards, coils and fan on induction.
You decide
Repair or not, your call.
Repair
The part is replaced, and every burner is tested on every setting. The repair carries a 90-day guarantee.
Brands we repair
GE, Whirlpool, KitchenAid, Frigidaire, Samsung, LG, Maytag, Bosch, Electrolux, Kenmore, Amana, Jenn-Air and Hotpoint, plus Wolf, Viking, Thermador, Dacor, Gaggenau and Fisher & Paykel.
FAQ
Why won't my burner work?
The element, its receptacle or its switch. If every burner is dead, the cause is the power supply, the terminal block or the control board.
Can a cracked glass top be repaired?
No. The glass is replaced as one panel, and we check the elements underneath while it's off.
How much does stove repair cost?
Repairs run $150 to $1,000, depending on the fault, the part and the model. A coil element or switch sits at the lower end. A glass top or induction board sits at the higher end. The $99 to $159 diagnostic is credited toward the repair if you go ahead.
What's the difference between range and cooktop repair?
A range is a cooktop plus an oven in one appliance. This page covers the top. Oven Repair covers the oven cavity.
The clock works but nothing heats. Why?
Usually one leg of the 240V supply is lost, either at the breaker or at the terminal block. The clock only needs one leg, but the elements need both.
Do you repair high-end and induction cooktops?
Yes, including Wolf, Thermador and SKS induction tops. See High-End Appliance Repair.
My induction cooktop won't detect the pan. Is it broken?
Test the pan with a magnet first. If the magnet doesn't stick, the pan won't work on induction. If it sticks and the cooktop still won't detect it, the board or coil is the likely cause.
Is it guaranteed? Where do you work?
Every repair carries a 90-day guarantee on parts and labor. We work across Utah County and Salt Lake County.